| Naslov: | Development of an experimental Dead-End microfiltration layout and process repeatability analysis |
|---|
| Avtorji: | ID Bombek, Gorazd (Avtor)
ID Kevorkijan, Luka (Avtor)
ID Hrovat, Grega (Avtor)
ID Kuzman, Drago (Avtor)
ID Kapun, Aleks (Avtor)
ID Ravnik, Jure (Avtor)
ID Hriberšek, Matjaž (Avtor)
ID Hribernik, Aleš (Avtor) |
|---|
| Datoteke: |  processes-12-00253.pdf (5,64 MB)
MD5: F2AA771F9BD7E512B8216C031A9C70CD
 https://www.mdpi.com/2227-9717/12/2/253
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Microfiltration is an important process in the pharmaceutical industry. Filter selection and validation is a time-consuming and expensive process. Quality by design approach is important for product safety. The article covers the instrumentalization and process control of a laboratory-scale dead-end microfiltration layout. The layout is a downscale model of the actual production line, and the goal is filter validation and analysis of process parameters, which may influence filter operation. Filter size, fluid pressure, valve plunger speed, and timing issues were considered. The focus is on the identification of the most influential process parameters and their influence on the repeatability of pressure oscillations caused by valve opening. The goal was to find the worst-case scenario regarding pressure oscillations and, consequently, filter energy intake. The layout was designed as compact as possible to reduce pressure losses between the filter and valve. Valve-induced pressure oscillations proved to be prevailing over the water hammer effect. Several filters in sizes between 3.5 cm2 and 6900 cm2 were tested, and some recommendations were suggested for the reduction of energy intake of the filter and to improve the repeatability of the process. |
|---|
| Ključne besede: | filtration, pressure oscillations, repeatability, processes, parameters |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 16.01.2024 |
|---|
| Datum sprejetja članka: | 18.01.2024 |
|---|
| Datum objave: | 24.01.2024 |
|---|
| Založnik: | MDPI |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | 19 str. |
|---|
| Številčenje: | Vol. 12, iss. 2, [article no.] 253 |
|---|
| PID: | 20.500.12556/DKUM-86972  |
|---|
| UDK: | 532:542.67 |
|---|
| COBISS.SI-ID: | 183408643 |
|---|
| DOI: | 10.3390/pr12020253 |
|---|
| ISSN pri članku: | 2227-9717 |
|---|
| Datum objave v DKUM: | 01.02.2024 |
|---|
| Število ogledov: | 425 |
|---|
| Število prenosov: | 25 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
