| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Izpis gradiva Pomoč

Naslov:Assembly line optimization using MTM time standard and simulation modeling—A case study
Avtorji:ID Breznik, Matic (Avtor)
ID Buchmeister, Borut (Avtor)
ID Vujica-Herzog, Nataša (Avtor)
Datoteke:.pdf applsci-13-06265.pdf (3,25 MB)
MD5: 7A6206F48AD522A708187E9F1420A891
 
Jezik:Angleški jezik
Vrsta gradiva:Neznano
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Opis:This study presents an approach to solving the assembly line balancing problem (ALBP) using the Methods-Time Measurement (MTM) time standard and simulation software. ALBP is a common problem in manufacturing where a set of tasks with fixed times must be assigned to a series of sequential workstations in order to minimize the total idle time and reduce the assembly cost per product. This study uses MTM, a widely used production process scheduling method, to create a new time analysis of an assembly process that was previously balanced using the Work-Factor method and time study. This literature review shows that there are a lack of combinations of updated time analyses with newer simulation approaches in the current literature, and this was the motivation for the present work. An assembly line simulation was performed using Simio software to evaluate different design options and operating scenarios. The results show that the use of MTM and simulation can help minimize idle time and improve assembly line performance, thereby reducing costs and increasing efficiency. This study shows that the approach of using MTM and simulation is effective in solving ALBP and is a useful tool for manufacturing companies to improve the performance of their assembly lines and reduce costs.
Ključne besede:optimization, production planning, assembly line, MTM time standard, simulation, industry 4.0
Datum objave:01.05.2023
Leto izida:2023
Št. strani:18 str.
Številčenje:Vol. 13, iss. 10, [article no.] 6265
PID:20.500.12556/DKUM-84326-336dc5b9-eeb9-01d7-d351-0bbab771d746 Novo okno
UDK:658.5:004.94
COBISS.SI-ID:153079555 Novo okno
DOI:10.3390/app13106265 Novo okno
ISSN pri članku:2076-3417
Datum objave v DKUM:23.05.2023
Število ogledov:322
Število prenosov:38
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
Področja:Ostalo
:
Kopiraj citat
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share


Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del revije

Naslov:Applied sciences
Skrajšan naslov:Appl. sci.
Založnik:MDPI
ISSN:2076-3417
COBISS.SI-ID:522979353 Novo okno

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:optimizacija, planiranje proizvodnje, tekoči trak, MTM časovni standard, simulacije, industrija 4.0


Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj
Logotipi partnerjev Univerza v Mariboru Univerza v Ljubljani Univerza na Primorskem Univerza v Novi Gorici