| Naslov: | Optimization of machining parameters for turning operation with multiple quality characteristics using Grey relational analysis |
|---|
| Avtorji: | ID Puh, Franko (Avtor)
ID Jurković, Zoran (Avtor)
ID Perinic, Mladen (Avtor)
ID Brezočnik, Miran (Avtor)
ID Buljan, Stipo (Avtor) |
|---|
| Datoteke: |  Tehnicki_vjesnik_2016_Puh_et_al._Optimization_of_machining_parameters_for_turning_operation_with_multiple_quality_characteristics_using.pdf (487,53 KB)
MD5: 3D2501C73C67AEE555A21263B70A456D
PID: 20.500.12556/dkum/1a53a6e4-2d23-4dc7-afdb-5e65b1fc560b
 http://hrcak.srce.hr/156824
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Optimization of machining processes is essential for achieving of higher productivity and high quality products in order to remain competitive. This study investigates multi-objective optimization of turning process for an optimal parametric combination to provide the minimum surface roughness (Ra) with the maximum material-removal rate (MRR) using the Grey–Based Taguchi method. Turning parameters considered are cutting speed, feed rate and depth of cut. Nine experimental runs based on Taguchi’s L9 (34) orthogonal array were performed followed by the Grey relational analysis to solve the multi- response optimization problem. Based on the Grey relational grade value, optimum levels of parameters have been identified. The significance of parameters on overall quality characteristics of the cutting process has been evaluated by the analysis of variance (ANOVA). The optimal parameter values obtained during the study have been validated by confirmation experiment. |
|---|
| Ključne besede: | ANOVA, Grey relational analysis, multi-objective optimization, Taguchi method, turning |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Leto izida: | 2016 |
|---|
| Št. strani: | str. 377-382 |
|---|
| Številčenje: | Letn. 23, št. 2 |
|---|
| PID: | 20.500.12556/DKUM-66822  |
|---|
| ISSN: | 1330-3651 |
|---|
| UDK: | 621.941:681.5 |
|---|
| COBISS.SI-ID: | 19580182 |
|---|
| DOI: | 10.17559/TV-20150526131717 |
|---|
| ISSN pri članku: | 1330-3651 |
|---|
| NUK URN: | URN:SI:UM:DK:BE58JWAQ |
|---|
| Datum objave v DKUM: | 12.07.2017 |
|---|
| Število ogledov: | 1089 |
|---|
| Število prenosov: | 388 |
|---|
| Metapodatki: |     |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
