| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Izpis gradiva Pomoč

Naslov:Numerical modelling of crack growth in a gear tooth root
Avtorji:ID Podrug, Srđan (Avtor)
ID Glodež, Srečko (Avtor)
ID Jelaska, Damir (Avtor)
Datoteke:URL http://www.dlib.si/details/URN:NBN:SI:doc-OP2WLSV8
 
Jezik:Angleški jezik
Vrsta gradiva:Delo ni kategorizirano
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FNM - Fakulteta za naravoslovje in matematiko
Opis:A computational model for determination of crack growth in a gear tooth root is presented. Two loading conditions are taken into account: (i) normal pulsating force acting at the highest point of the single tooth contact and (ii) the moving load along the tooth flank. In numerical analysis it is assumed that the crack is initiated at the point of the largest stresses in a gear tooth root. The simple Paris equation is then used for a further simulation of the fatigue crack growth. The functional relationship between the stress intensity factor and crack length K=f(a), which is needed for determining the required number of loading cycles N for a crack propagation from the initial to the critical length, is obtained using a displacement correlation method in the framework of the FEM-method considering the effect of crack closure. The model is used for determining fatigue crack growth in a real gear made from case carburised and ground steel 14CiNiMo13-4, where the required material parameters were determined previously by appropriate test specimens. The results of the numerical analysis show that the prediction of crack propagation live and crack path in a gear tooth root are significantly different for both loading conditions considered.
Ključne besede:zobniki, utrujanje, širjenje razpoke, numerično modeliranje, gears, fatigue, crack growth, numerical modelling
Založnik:= Association of Mechanical Engineers and Technicians of Slovenia et al.
Leto izida:2011
Št. strani:str. 579-586
Številčenje:Vol. 57, no. 7/8
PID:20.500.12556/DKUM-52247 Novo okno
UDK:621.833:539.4
COBISS.SI-ID:18575368 Novo okno
DOI:10.5545/sv-jme.2009.127 Novo okno
ISSN pri članku:0039-2480
NUK URN:URN:SI:UM:DK:VWEREQMF
Datum objave v DKUM:10.07.2015
Število ogledov:1347
Število prenosov:85
Metapodatki:XML DC-XML DC-RDF
Področja:Ostalo
:
Kopiraj citat
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share


Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del revije

Naslov:Strojniški vestnik
Skrajšan naslov:Stroj. vestn.
Založnik:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.]
ISSN:0039-2480
COBISS.SI-ID:762116 Novo okno

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj
Logotipi partnerjev Univerza v Mariboru Univerza v Ljubljani Univerza na Primorskem Univerza v Novi Gorici