| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Izpis gradiva Pomoč

Naslov:The influence of different parameters on surface pitting of contacting mechanical elements
Avtorji:ID Fajdiga, Gorazd (Avtor)
ID Flašker, Jože (Avtor)
ID Glodež, Srečko (Avtor)
Datoteke:URL http://dx.doi.org/10.1016/S0013-7944(03)00022-5
 
Jezik:Angleški jezik
Vrsta gradiva:Neznano
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Opis:The paper describes a general computational model for simulation of surface pitting of mechanical elements subjected to contact loading conditions. In the model it is assumed that the initial crack of length 0.015 mm is initiated at the contacting surfaces due to previously thermal, mechanical treatment of the material or running in process. The discretised model with the initial crack is then subjected to normal contact pressure, which takes into account the EHD lubrication conditions and tangential loading due to friction between contacting surfaces. The model accounts also for the influence of fluid trapped in the crack on crack prppagation. The virtual crack extension VCE method within FEM analysis is then used for 2 dimensional simulation of fatigue crack propagation from the initial crack up to the formation of the surface pit. The pit shapes and relationships between the stress intensity factor and crack length are determined for various combinations of contacting surface curvatures and loadings. The comparison of computational and available experimental results shows that the proposed model reliably simulates the surface fatigue crack growth under contact loading and can be used for computational predictions of surface pitting for various contacting mechanical elements.
Ključne besede:machine elements, gears, contact problems, pitting, fatigue crack growth, simulation, model
Leto izida:2004
PID:20.500.12556/DKUM-27492 Novo okno
UDK:621.833:539.3
COBISS.SI-ID:8436502 Novo okno
ISSN pri članku:0013-7944
NUK URN:URN:SI:UM:DK:KGPUUGIK
Datum objave v DKUM:01.06.2012
Število ogledov:2182
Število prenosov:111
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
Področja:Ostalo
:
Kopiraj citat
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share


Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del revije

Naslov:Engineering fracture mechanics
Skrajšan naslov:Eng. fract. mech.
Založnik:Pergamon Press.
ISSN:0013-7944
COBISS.SI-ID:25396736 Novo okno

Sekundarni jezik

Jezik:Angleški jezik
Ključne besede:strojni elementi, zobniška gonila, kontaktni problemi, jamičenje, rast utrujenostne razpoke, simulacija, model


Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj
Logotipi partnerjev Univerza v Mariboru Univerza v Ljubljani Univerza na Primorskem Univerza v Novi Gorici