| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Izpis gradiva Pomoč

Naslov:On fracture behaviour of inhomogeneous materials - a case study for elastically inhomogeneous bimaterials
Avtorji:ID Kolednik, Otmar (Avtor)
ID Predan, Jožef (Avtor)
ID Shan, G.X. (Avtor)
ID Simha, N.K. (Avtor)
ID Fischer, Franz Dieter (Avtor)
Datoteke:URL http://dx.doi.org/10.1016/j.ijsolstr.2004.06.064
 
Jezik:Angleški jezik
Vrsta gradiva:Neznano
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Opis:This paper presents a case study, examining the influence of a sharp bimaterial interface on the effective crack driving force in a fracture mechanics specimen. The inhomogeneity of the elastic modulus in linear elasticand non-hardening and hardening elastic-plastic bimaterials is considered. The interface is perpendicular to the crack plane. The material properties and the distance between the crack tip and the interface are systematically varied. The effect of the material inhomogeneity is captured in form of a quantity called "material inhomogeneity term",▫$C_inh$▫. This term can be evaluated either by a simple post-processing procedure, following a conventional finite element stress analysis, or by computing the J-integral along a contour around the interface, ▫$J_int$▫. The effective crack driving force,▫$J_tip$▫, can be determined as the sum of ▫$C_inh$▫ and the nominally applied far-field crack driving force, ▫$J_far$▫. The results show that ▫$C_inh$▫ can be accurately determined by both methods even in cases where ▫$J_tip$▫-values are inaccurate. When a crack approaches a stiff/compliant interface,▫$C_inh$▫ is positive and ▫$J_tip$▫ becomes larger than ▫$J-far$▫. A compliant/stiff transition leads to a negative ▫$C_inh$▫, and ▫J_tip$▫ becomes smaller than ▫$J_far$▫. The material inhomogeneity term, ▫$C_inh$▫, can have the same order of magnitude as ▫$J_far$▫. Based on the numerical results, the dependencies of ▫$C_inh$▫ on the material parameters and the geometry are derived. Simple expressions are obtained to estimate ▫$C_inh$▫.
Ključne besede:mechanics of structures, fracture toughness, inhomogeneous materials, J-integral, crack driving force, interface, material force
Leto izida:2005
PID:20.500.12556/DKUM-27207 Novo okno
UDK:539.3:620.1
COBISS.SI-ID:9129238 Novo okno
ISSN pri članku:0020-7683
NUK URN:URN:SI:UM:DK:NFTWQKFQ
Datum objave v DKUM:01.06.2012
Število ogledov:1720
Število prenosov:37
Metapodatki:XML DC-XML DC-RDF
Področja:Ostalo
:
Kopiraj citat
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share


Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del revije

Naslov:International journal of solids and structures
Skrajšan naslov:Int. j. solids struct.
Založnik:Pergamon Press
ISSN:0020-7683
COBISS.SI-ID:997903 Novo okno

Sekundarni jezik

Jezik:Angleški jezik
Ključne besede:mehanika konstrukcij, lomna žilavost, nehomogeni materiali, J-integral, gonilna sila razpoke, meja, sila odpora materiala


Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj
Logotipi partnerjev Univerza v Mariboru Univerza v Ljubljani Univerza na Primorskem Univerza v Novi Gorici