| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Izpis gradiva

Naslov:Intelligent cutting tool condition monitoring in milling
Avtorji:Župerl, Uroš (Avtor)
Čuš, Franc (Avtor)
Balič, Jože (Avtor)
Datoteke:URL http://www.journalamme.org/papers_vol49_2/49239.pdf
 
Jezik:Angleški jezik
Vrsta gradiva:Neznano ()
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Opis:Purpose: of this paper is to present a tool condition monitoring (TCM) system that can detect tool breakage in real time by using a combination of neural decision system, ANFIS tool wear estimator and machining error compensation module. Design/methodology/approach: The principal presumption was that the force signals contain the most useful information for determining the tool condition. Therefore, ANFIS method is used to extract the features of tool states from cutting force signals. The trained ANFIS model of tool wear is then merged with a neural network for identifying tool wear condition (fresh, worn). Findings: The overall machining error is predicted with very high accuracy by using the deflection module and a large percentage of it is eliminated through the proposed error compensation process. Research limitations/implications: This study also briefly presents a compensation method in milling in order to take into account tool deflection during cutting condition optimization or tool-path generation. The results indicate that surface errors due to tool deflections can be reduced by 65-78%. Practical implications: The fundamental limitation of research was to develop a single-sensor monitoring system, reliable as commercially available system, but much cheaper than multi-sensor approach. Originality/value: A neural network is used in TCM as a decision making system to discriminate different malfunction states from measured signals.
Ključne besede:tool condition monitoring, TCM, wear, tool deflection, ANFIS, neural network, end-milling
Leto izida:2011
UDK:621.9:004.89
COBISS_ID:15846422 Povezava se odpre v novem oknu
ISSN pri članku:1734-8412
NUK URN:URN:SI:UM:DK:N8RV1GOJ
Število ogledov:878
Število prenosov:20
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
Področja:Ostalo
:
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del revije

Naslov:Journal of achievements in materials and manufacturing engineering
Skrajšan naslov:J. achiev. mater. manuf. eng.
Založnik:International OCSCO World Press
ISSN:1734-8412
COBISS.SI-ID:10509078 Novo okno

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj
Logotipi partnerjev Univerza v Mariboru Univerza v Ljubljani Univerza na Primorskem Univerza v Novi Gorici