| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Izpis gradiva

Naslov:Design of the optimal total site heat recovery system using SSSP approach
Avtorji:Goršek, Andreja (Avtor)
Glavič, Peter (Avtor)
Bogataj, Miloš (Avtor)
Datoteke:URL http://dx.doi.org/10.1016/j.cep.2005.10.003
 
Jezik:Angleški jezik
Vrsta gradiva:Neznano ()
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FKKT - Fakulteta za kemijo in kemijsko tehnologijo
Opis:Site expansions or changes in production capacities are usually related with changes of utilities demands andžor utility system design. Despite several available and well established techniques for process synthesis and integration, very often, changes in process designs are made on the basis of intuition and experiences of engineers. In this paper possibilities of rational energy consumption and energy integration in an existing site for production of specialty chemicals were studied. On the basis of real process parameters and computer simulation results energy integration was re-examined.Total site analysis using modified Site Sink Source Profiles, which gives a profound insight into the site utility system configuration, heating-cooling demands and cogeneration design was performed. The existing site was found to be very well designed. With only few modifications additional 9% of hot utilities and 5% of cold utilities savings are possible.
Ključne besede:chemical engineering, process design, optimization, heat integration, cogeneration, pinch method, energy retrofit
Leto izida:2006
UDK:66.012
COBISS_ID:10148118 Povezava se odpre v novem oknu
ISSN pri članku:0255-2701
NUK URN:URN:SI:UM:DK:S0NBE9Q8
Število ogledov:1907
Število prenosov:69
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
Področja:Ostalo
:
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del revije

Naslov:Chemical engineering and processing
Skrajšan naslov:Chem. eng. process.
Založnik:Elsevier Sequoia
ISSN:0255-2701
COBISS.SI-ID:5825287 Novo okno

Sekundarni jezik

Jezik:Angleški jezik
Ključne besede:kemijska procesna tehnika, načrtovanje procesov, optimiranje, toplotna integracija, kogeneracija, metoda uščipa, energetska rekonstrukcija


Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj
Logotipi partnerjev Univerza v Mariboru Univerza v Ljubljani Univerza na Primorskem Univerza v Novi Gorici