1. Reinforcing ethyl cellulose aerogels with poly(lactic acid) for enhanced bone regenerationGabrijela Horvat, Jan Rožanc, Uroš Maver, Matjaž Finšgar, Željko Knez, Zoran Novak, 2024, original scientific article Abstract: Developing double porous biodegradable and biocompatible scafolds that can incorporate and release drugs in a controlled manner holds immense potential in regenerative medicine. This study presents a synthesis method for preparing a macro-mesoporous scafold, where poly(lactic acid) adds to the macroporous region and mechanical properties, and ethyl cellulose adds to the surface area (182 m2 /g). High surface area enables the incorporation of model drug indomethacin with an entrapment efciency of 17.0% and its later controlled release profle. The resulting scafold has desirable mechanical properties in the range of a natural trabecular bone with a compressive modulus of 22.4 MPa. The material is stable in the simulated body fuids for 120 days before the slow degradation starts. In vitro studies demonstrate the material’s ability to support bone cell adhesion, proliferation, and diferentiation, promoting osteogenic activity. Overall, the unique combination of poly(lactic acid) and ethyl cellulose produces advanced materials with tailored macro and mesopore properties, remarkable mechanical properties, optimal degradation rate, and drug delivery potential, making it a promising candidate for bone scafolds in regenerative medicine and tissue engineering
Keywords: bio composite, polymer-matrix composites (PMCs), polymers, porosity/voids, secondary ion mass spectrometry
Published in DKUM: 23.08.2024; Views: 130; Downloads: 9
 Full text (2,87 MB) |
2. Long-term creep compliance of wood polymer composites: using untreated wood fibers as a filler in recycled and neat polypropylene matrixMarko Bek, Alexandra Aulova, Klementina Pušnik Črešnar, Sebastjan Matkovič, Mitjan Kalin, Lidija Slemenik Perše, 2022, original scientific article Abstract: Neat (NPP) and recycled (RPP) polypropylene matrix materials were used to prepare wood–polymer composites with untreated wood fibers up to 40 wt.%. Long-term creep properties obtained through the time-temperature superposition showed superior creep resistance of composites with NPP matrix. In part, this is attributed to their higher crystallinity and better interfacial adhesion caused by the formation of a transcrystalline layer. This difference resulted in up to 25% creep compliance reduction of composites with NPP matrix compared to composites with recycled (RPP) polypropylene matrix, which does not form a transcrystalline layer between the fibers and polymer matrix. Despite the overall inferior creep performance of composites with RPP matrix, from the 20 wt.% on, the creep compliance is comparable and even surpasses the creep performance of unfilled NPP matrix and can be a promising way to promote sustainability.
Keywords: lesno-polimerni kompoziti, lezenje, vzdržljivost, les, recikliranje, wood–polymer composites, creep, durability, wood, recycling
Published in DKUM: 16.08.2023; Views: 381; Downloads: 470
 Link to full text
This document has many files! More... |
3. Monolithic magneto-optical nanocomposites of barium hexaferrite platelets in PMMAGregor Ferk, Peter Krajnc, Anton Hamler, Alenka Mertelj, Federico Cebollada, Mihael Drofenik, Darja Lisjak, 2015, original scientific article Abstract: The incorporation of magnetic barium hexaferrite nanoparticles in a transparent polymer matrix of poly(methyl methacrylate) (PMMA) is reported for the first time. The barium hexaferrite nanoplatelets doped with Sc3+, i.e., BaSc0.5Fe11.5O12 (BaHF), having diameters in the range 20 to 130 nm and thicknesses of approximately 5 nm, are synthesized hydrothermally and stabilized in 1-butanol with dodecylbenzenesulfonic acid. This method enables the preparation of monolithic nanocomposites by admixing the BaHF suspension into a liquid monomer, followed by in-situ, bulk free-radical polymerization. The PMMA retains its transparency for loadings of BaHF nanoparticles up to 0.27 wt.%, meaning that magnetically and optically anisotropic, monolithic nanocomposites can be synthesized when the polymerization is carried out in a magnetic field. The excellent dispersion of the magnetic nanoparticles, coupled with a reasonable control over the magnetic properties achieved in this investigation, is encouraging for the magneto-optical applications of these materials.
Keywords: polymer composites, nanoparticles, polymethyl methacrylate, PMMA
Published in DKUM: 23.06.2017; Views: 1638; Downloads: 450
Full text (1,10 MB)
This document has many files! More... |
