| | SLO | ENG | Cookies and privacy

Bigger font | Smaller font

Search the digital library catalog Help

Query: search in
search in
search in
search in
* old and bologna study programme

Options:
  Reset


1 - 1 / 1
First pagePrevious page1Next pageLast page
1.
The removal of reactive dye printing compounds using nanofiltration
Irena Petrinić, Niels Peder Raj Andersen, Sonja Šostar-Turk, Alenka Majcen Le Marechal, 2007, original scientific article

Abstract: A synthetically prepared reactive dye print wastewater, mimicking real wastewater obtained from a local textile mill, was treated by nanofiltration using an NFT-50 membrane in a plate and frame module configuration at different cross-flow velocities (0.4, 0.6 and 0.8 m/s) and pressures (2-15 bar). The nanofiltration membrane was evaluated for membrane fouling, permeate flux and its suitability for removing colour, conductivity, Na+ ions and COD as a function of operating pressure and feed concentration. The permeate separation efficiency was monitored by measuring the removal efficiency of colour, conductivity, Na+ ions and COD retention. The membrane achieved high dye retention for each of the four dyes (from 99.4 to 99.9%) and electrolytes used (63-73%). The retention of organic substances varied between 20 and 50%, depending on the pressure used; higher retentions were achieved at higher pressure and by using higher cross-flow velocities.
Keywords: nanofiltration, nanofitration membranes, wastewater after reactive printing, reactive dye, concentration polarization
Published: 01.06.2012; Views: 1376; Downloads: 77
URL Link to full text

Search done in 0.04 sec.
Back to top
Logos of partners University of Maribor University of Ljubljana University of Primorska University of Nova Gorica